RL V6-3.7L (2009)
Air Register: Service and Repair
Driver's Vent Panel Removal/Installation
Driver's Vent Panel Removal/Installation
Special Tools Required
-
KTC trim tool set SOJATP2014*
*Available through the Acura Tool and Equipment Program
NOTE:
-
Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
-
Take care not to scratch the dashboard and related parts.
1. Remove the instrument fascia. See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Instrument
Fascia Removal/Installation
2. Gently pull out the driver's vent panel (A) to release the clips (B, C), then remove the panel.
3. Install the panel in the reverse order of removal, and note these items:
-
If the clips are damaged or stress-whitened, replace them with new ones.
-
Push the clips into place securely.
