RL V6-3.7L (2009)
Side Airbag
4. Disconnect driver's and front passenger's side airbag 2P connectors (A) from the left side wire harness or right side wire harness.
Side Curtain Airbag
5. Remove the headliner. See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair Disconnect both side curtain airbag harness
2P connectors (A) from the side curtain airbags.
Seat Belt Tensioner
6. Remove the B-pillar lower trim. See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/Interior Trim
Removal/Installation - B-Pillar Lower Trim Disconnect both floor wire harness 4P connector (A) from the seat belt tensioners.
SRS Unit
7. Remove the center console, See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Removal and Replacement/Center
Console Removal/Installation then remove the rear vent duct A. See: Dashboard / Instrument Panel/Service and Repair/Dashboard/Steering
Hanger Beam Removal/Installation Disconnect SRS unit connector A (28P), SRS unit connector B (28P), and/or SRS unit connector C (28P) from
the SRS unit.
