RL V6-3.7L (2009)
6. Install a new bulb in the reverse order of removal.
Front Turn Signal Light Bulb
1. Remove the parts shown:
-
Battery trim
-
Upper grille cover See: Body and Frame/Grille/Service and Repair/Upper Grille Cover Replacement
-
Right upper fender trim
2. For the left light, remove the battery hold-down by removing the two nuts, then slide the battery to access the bulb.
3. Disconnect the 3P connector (A) from the bulb socket (B).
4. Turn the bulb socket 45 ° counterclockwise to remove it from the headlight housing.
5. Install a new bulb in the reverse order of removal.
