RL V6-3.7L (2009)
30. Connect the HDS to the DLC. See: Testing and Inspection/Initial Inspection and Diagnostic Overview
31. Jump the SCS line with the HDS.
32. Disconnect PCM connector E (31P).
33. Disconnect the HDS from the DLC.
34. Connect DLC terminal No. 6 to body ground with a jumper wire.
35. Check for continuity between PCM connector terminal E15 and body ground.
Is there continuity?
YES - Go to step 36.
NO - Repair open in the wire between the PCM (E15) and DLC terminal No. 6.
36. Connect DLC terminal No. 14 to body ground with a jumper wire.
