RL V6-3.7L (2009)
Information Bus: Component Tests and General Diagnostics
Troubleshooting - B-CAN System Diagnosis Test Mode A
Troubleshooting - B-CAN System Diagnosis Test Mode A
NOTE: AcuraLink can be used to easily check for B-CAN line failure. See: Accessories and Optional Equipment/Radio, Stereo, and Compact
Disc/Testing and Inspection/Reading and Clearing Diagnostic Trouble Codes/How to Troubleshoot the AcuraLink (With AcuraLink)
Do this diagnosis first if the symptom is related to the B-CAN system.
NOTE: Always turn the ignition switch within 3 seconds when prompted in the DTC troubleshooting procedures in this section.
1. Check the symptom against this list of B-CAN related systems:
-
Gauge control module
-
Exterior lights
-
Turn signals
-
Entry light control
-
Interior lights
-
Safety indicators
-
Rear window defogger
-
HandsFreeLink
-
Horns (security and panic)
-
Chimes (key, seat belt, lights-on, and parking brake)
-
Power windows
-
Power window/moonroof timer
-
Wiper/washer
-
Security
-
Keyless entry
-
Power door locks
-
Climate control
-
Key interlock
-
Dash light brightness
-
Driving position memory system
-
Keyless access
-
XM radio
Is the symptom related to the B-CAN system?
YES - Go to step 2.
NO - Go to the system troubleshooting for the system with the symptom.
2. Connect the HDS, then turn the ignition switch to ON (II).