RL V6-3.7L (2009)
Fuel Gauge Sender: Service and Repair
Secondary Fuel Gauge Sending Unit Replacement
Secondary Fuel Gauge Sending Unit Replacement
1. Relieve the fuel pressure. See: Fuel Filter/Fuel Pressure Release/Service and Repair
2. Remove the fuel cap.
3. Remove the rear seat cushion. See: Body and Frame/Seats/Seat Cover/Service and Repair/Rear Seat Cushion Cover Replacement
4. Remove the access panel (A) from the right side of the floor.
5. Disconnect the secondary fuel gauge sending unit 5P connector (B).
6. Remove the secondary fuel gauge sending unit (A).
7. Remove the fuel gauge sending unit (A).
8. Install the parts in the reverse order of removal with a new base gasket (B).
NOTE: When installing the fuel gauge sending unit, make sure the connection is secure and the connector is firmly locked into place. Be careful
not to bend or twist it excessively.