RL V6-3.7L (2009)
^
Refer to page 20-83 of the 2009 RL Service Manual, or
^
Online, enter keywords TRUNK TRIM, and select Interior Trim Removal/Installation- Trunk Area from the list.
2. Locate and disconnect the AcuraLink control unit 5P update connector.
3. Do the PCM update. (Refer to the specific service bulletin for the symptom you are repairing.)
4. After you complete the PCM update, reconnect the AcuraLink control unit 5P update connector.
5. Reinstall the trunk left side trim panel in the reverse order of removal.*
PROCEDURE: TL
NOTE:
This procedure is required only if you are updating the PCM.
1. Before updating the PCM, make sure the engine start/stop button is in OFF mode.
2. Remove the glove box:
^
Refer to page 20-128 of the 2009 TL Service Manual, or
^
Online, enter keyword GLOVE, and select Glove Box Removal/Installation from the list.
