RL V6-3.7L (2009)
Seat Belt: Testing and Inspection
Seat Belt Inspection
Out of Vehicle
For front seat belt retractor with seat belt tensioner, review the SRS component locations, See: Air Bag Systems/Locations and the precautions and
procedures See: Air Bag(s) Arming and Disarming/Service and Repair before doing repairs or service.
Retractor
1. Before installing the retractor, check that the seat belt can be pulled out freely.
2. Make sure that the seat belt does not lock when the retractor (A) is leaned slowly up to 15 ° from the mounted position. The seat belt should lock
when the retractor is leaned over 40 °. Do not attempt to disassemble the retractor.
3. Replace the seat belt with a new assembly if it does not function properly. Do not disassemble any part of the seat belt for any reason.
Front
Rear
Rear center
In-vehicle
1. Check that the seat belt is not twisted or caught on anything.
