RL V6-3.7L (2009)
NO - Repair open in the wire between the PSP switch and the PCM (E17).
24. Check for continuity between PSP switch 2P connector terminal No. 2 and body ground.
Is there continuity?
YES - Update the PCM if it does not have the latest software, See: Powertrain Management/Computers and Control Systems/Testing and
Inspection/Programming and Relearning/PCM Update or substitute a known-good PCM, See: Powertrain Management/Computers and
Control Systems/Testing and Inspection/Initial Inspection and Diagnostic Overview then recheck. If the symptom/indication goes away with a
known-good PCM, replace the original PCM. See: Powertrain Management/Computers and Control Systems/Engine Control Module/Service
and Repair
NO - Repair open in the wire between the PSP switch and G401.
