RL V6-3.7L (2009)
2. Connect the alternator connector (A) and the BLK wire (B) to the alternator.
3. Install the bolt (C) securing the harness holder.
4. Install the drive belt. See: Engine, Cooling and Exhaust/Engine/Drive Belts, Mounts, Brackets and Accessories/Drive Belt/Service and Repair
5. Install the A/C condenser fan shroud (A), and tighten the bolts.
6. Install the coolant reservoir (B).
7. Install the RFC unit. See: Accessories and Optional Equipment/Antitheft and Alarm Systems/Keyless Entry/Keyless Entry Receiver/Service and
Repair/RFC Unit Replacement
8. Raise the vehicle on the lift to full height.
9. Tighten the two bolts (A) securing the A/C condenser fan shroud.
