RL V6-3.7L (2009)
Suspension Strut / Shock Absorber: Removal and Replacement
Front Damper/Spring Removal and Installation
Front Damper/Spring Removal/Installation
Removal
1. Remove the upper fender trims (A).
2. Raise the front of the vehicle, and support it with safety stands in the proper locations. See: Wheels and Tires/Vehicle Lifting/Service and Repair
3. Remove the front wheel, taking care not to scratch the caliper.
4. Remove the damper fork (A) from the damper (B) and the lower arm (C) while pushing the lower arm down.
5. Disconnect the stabilizer link (D) from the lower arm. See: Stabilizer Bar/Stabilizer Link/Service and Repair/Front Stabilizer Link
Removal/Installation
6. Remove the 8 mm flange nuts (A) and the 10 mm flange nuts (B) from the top of the damper.
7. Remove the damper assembly (A).
NOTE:
