RL V6-3.7L (2009)
7. Push the shift cable (A) until it stops, then release it. Pull the shift cable back one step so that the shift position is in R. Do not hold the shift cable
guide (B) to adjust the shift cable.
8. Turn the ignition switch to ON (II), and verify that the R position indicator comes on.
9. Turn the ignition switch to LOCK (0).
10. Place the shift lever in the R position, then insert a 6.0 mm (0.24 in.) pin (A) through the positioning hole (B) on the shift lever bracket, through
the positioning hole (C) on the shift lever, and into the positioning hole on the shift lever bracket.
11. Check that the shift lever is secured in the R position.
