RL V6-3.7L (2009)
12. Unhinge the retainer lock (A).
13. Rotate the socket holder retainer (A) counterclockwise (B) until it stops to create clearance (C) between the socket holder (D) and holder retainer,
and push the retainer lock (E) into the socket holder retainer to lock the retainer.
14. Align the clearance (A) between the socket holder (B) and the socket holder retainer (C) with the opening (D) in the shift lever bracket (E), then
slide the holder into the bracket with installing the shift cable end (F) over the mounting stud (G) by aligning its square hole (H) with the square
fitting (I) at the bottom of the stud. Do not install the shift cable by holding the shift cable guide (J).
NOTE: When the socket holder is installed in the shift lever bracket, the retainer lock is unhinged and releases the holder retainer lock, then the
holder retainer returns under spring force to secure the shift cable.
