RL V6-3.7L (2009)
Drive/Propeller Shaft: Service and Repair
Propeller Shaft Installation
Propeller Shaft Installation
NOTE: Wrap the length of each propeller shaft with cardboard, at least 5 mm thick to protect the carbon fiber shaft during removal and installation,
before removing the propeller shaft.
1. Install the No. 1 propeller shaft (A) to the transfer by flexing the No. 2 joint (B), then install the propeller shaft to the vehicle.
2. Install the center support bearing mounting bolts. Make sure you use new bolts.
3. Install the propeller shaft (A) onto the rear differential companion flange (B) by aligning the reference marks (C) you made. Make sure you use
new mounting bolts.
NOTE: When replacing the propeller shaft or the rear differential, align the factory reference marks.
