RL V6-3.7L (2009)
-
Do not apply body primer to the rear window, and do not get body and glass primer sponge applicators mixed up.
-
Never touch the primed surfaces with your hands. If you do, the adhesive may not bond to the rear window properly, causing a leak after the
rear window is installed.
-
Keep water, dust, and abrasive materials away from the primed surfaces.
18. With a sponge applicator, carefully apply a light coat of body primer to any exposed paint around the flange where new adhesive will be applied.
Let the primer dry for at least 10 minutes:
-
Do not apply body primer to any remaining original adhesive on the flange.
-
Be careful not to mix up the body and the glass primer sponge applicators.
-
Never touch the primed surfaces with your hands.
19. Cut a "V" in the end of the nozzle (A) on the adhesive cartridge as shown.
20. Put the cartridge in a caulking gun, and run a bead of adhesive (A) around the edge of the rear window (B) between the dams (C) and the molding
