RL V6-3474cc 3.5L (1998)
6. Remove the service check connector, the screws and the bolt, then remove the blower under cover with the glove box frame.
7. Disconnect the A/C wire harness connector from the main wire harness. Remove the wire harness clips. Disconnect the connectors from the
recirculation control motor, the evaporator temperature sensor, the power transistor and the blower motor. Remove the screw, then remove the
blower motor relay and the blower motor high relay together with the bracket.
8. Remove the wire harness connectors and the SRS main harness clip from the body. Disconnect the connectors from the multiplex control unit
