RL V6-3474cc 3.5L (1998)
11. Remove the clamps from the line mounting cushions, then remove the feed line from the cushions.
12. Disconnect the three lines (sensor inlet line, 10 mm return line and 6 mm return line) from the hoses.
CAUTION: After disconnecting the line, plug or seal the line with a piece of tape or equivalent.
13. Remove the mounting brackets and steering gearbox.
NOTE: Before removing the steering gearbox, place a jack stand under the gearbox to support it.
CAUTION: Be careful not to bend or damage fluid lines when removing the steering gearbox.
Installation
