RL V6-3474cc 3.5L (1998)
CAUTION: Be careful not to bend or damage cylinder lines A and B or the four fluid lines when installing the gearbox.
1. Assemble the mounting bracket over the mount cushion, then loosely install the gearbox on the rear beam with two gearbox mounting bolts.
NOTE: Move the feed line over the gearbox so that it does not interfere with the gearbox during installation.
2. Position the line mounting cushions by aligning the marks on the 10 mm return line (large diameter line).
3. Install the feed line on the slot of the cushions.
4. Install the two line clamps on the line mounting cushions.
