RL V6-3474cc 3.5L (1998)
NOTE: Use of a positioning jig is recommended.
-
Spot weld several points in the clamped sections, and temporarily attach the front wheelhouse and damper housing.
WARNING: To prevent eye injury and burns when welding, wear an approved welding helmet, gloves and safety shoes.
7. Check the dimensions, temporarily install the hood, front fender and headlight, and check for differences in level and clearance.
8. Perform the main welding.
-
Weld as much as possible with the jig still mounted.
WARNING: To prevent eye injury and burns when welding, wear an approved welding helmet, gloves and safety shoes.
-
Make 20% to 30% more spot welds than there were holes drilled.
