acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

A/T - Clunk During 1st To 2nd Gear Upshift|Page 7042 > < A/T - Clunk During 1st To 2nd Gear Upshift
Page 2
background image

Contention Code:

B02

Skill Level:

Repair Technician

Out of warranty: 
Any repair performed after warranty expiration may be eligible for goodwill consideration by the District Parts and Service Manager or your Zone
Office. You must request consideration, and get a decision, before starting work.

DIAGNOSIS

Test-drive the vehicle. Check the shift quality during several light-throttle 1st to 2nd upshifts.

^

If you notice a clunk when the transmission shifts into 2nd gear, go to REPAIR PROCEDURE.

^

If you do not notice a clunk when the transmission shifts into 2nd gear, look for other possible causes of your customer's complaint.

REPAIR PROCEDURE

1.

Remove the lower valve body assembly from the transmission (see page 14-112 of the 1996-01 3.5RL Service Manual).

2.

Place the lower valve body assembly on a clean work bench. Remove and retain the mounting bolt from the main valve body.

A/T - Clunk During 1st To 2nd Gear Upshift|Page 7042 > < A/T - Clunk During 1st To 2nd Gear Upshift