RL V6-3474cc 3.5L (1998)
3.
Remove all components and mounting hardware from the secondary valve body, then separate the secondary valve body from the main valve body
and the main separator plate. Make sure the main separator plate stays with the main valve body. Retain all components and mounting hardware
except for these items to be discarded:
^
Secondary valve body (with filters for the throttle separator plate and the shift solenoid valves A and B)
^
1st accumulator cover (with 0-ring), accumulator spring, and the 6 x 65 mm mounting bolt
^
2nd accumulator cover (with 0-ring), accumulator spring, spring guide with spring ('99-02 models), and the 6 x 95 mm and two 6 x 65 mm
mounting bolts
^
0-rings (from the solenoid valves A and B)
