RSX L4-2.0L (2005)
-
Make sure the cylinder switch harness (A) is routed properly.
-
Make sure the cylinder switch connector is plugged in properly, and each rod is connected securely.
-
Make sure the lock cylinder switch is engaged to the lock cylinder correctly.
-
Make sure the door locks and opens properly.
-
When installing the lock cylinder, leave the outer door handle bolts loose so the inner protector does not interfere with the lock cylinder
installation, then tighten the handle bolts.
-
Install the lock cylinder retaining clip on the handle, then install the lock cylinder. Be sure the clip is fully seated in the.slot on the lock
cylinder.
-
When reinstalling (he door panel, make sure the plastic cover is installed properly and sealed around its perimeter.
