RSX L4-2.0L (2005)
Carpet: Service and Repair
Carpet Replacement
Special Tools Required
KTC trim tool set SOJATP20U
SRS components are located in this area. Review the SRS component locations and the precautions and procedures before performing repairs or service.
NOTE:
-
Put on gloves to protect your hands.
-
Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
-
Take care not to damage, wrinkle, or twist the carpet.
-
Be careful not to damage the dashboard or other interior trim pieces.
1. Remove these items:
-
Front seats, both sides
-
Rear seat cushion
-
Center console
-
Door sill trim, both sides
-
Kick panel, both sides
-
Door opening trim, both sides
-
Front seat belt lower anchor, both sides
2. Detach the clips, then remove the footrest (A)
3. Using a utility knife, cut the carpet (A) at the shift lever area (B) and parking brake lever area (C) as shown.
