RSX L4-2.0L (2005)
4. Remove the carpet (A).
1. Remove the clip.
2. Release the fasteners (B), then pull back the carpet from under the dashboard.
3. Remove the front lower portions of both rear side trim panels (C) as necessary.
4. Pull the carpet out from both rear side trim panels.
5. If necessary, remove the floor mat holders (D).
5. Install the carpet in the reverse order of removal, and note these items:
-
Take care not to damage, wrinkle, or twist the carpet.
-
Make sure the seat harnesses are rooted correctly.
-
Slip the carpet under the rear side trim panel on each side property.
-
Replace the clip Hit's damaged.
-
Reattach the cut teas at the shift lever and parking brake lever with wire ties.
-
When installing new carpet, cut the carpet at the shift lever and parking brake lever. After installing the new carpet, reattach the cut areas with
wire ties.
