RSX L4-2.0L (2005)
Headliner: Service and Repair
Headliner Removal/Installation
Special Tools Required
KTC trim tool set SOJATP2014
NOTE:
-
Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
-
Take care not to bend And scratch the headliner.
-
Be careful not to damage the dashboard and other interior trim pieces.
1. Remove these items:
-
A-pillar trim, both sides
-
Front seat belt upper anchor, both sides
-
Rearview mirror
-
Spotlights with moonroof
-
Ceiling light
2. Remove the sunvisor (A) and holder (B) from both sides.
1. Remove the caps (C).
2. Remove the self-tapping ET screws.
3. Remove the sunvisor from the body and holder.
4. Using a flat-tip screwdriver, push the hook (D), and turn the holder 90 °, then pull it out.
3. Pull the door opening trim (A) away from the roof on both sides, and then release the upper portions of the quarter pillar trim pieces (B) from both