RSX L4-2.0L (2005)
2. Remove these items from the front seat
-
Recline cover, driver's seat, passenger's seat
-
Front seat belt buckle
3. From under the seat cushion, detach the side airbag connector clip, and on the passenger's seat, detach the OPDS unit connector clip. Release the
seat cushion cover from the seat cushion frame spring, then pull the cover back, and remove the harness bands.
4. Release the hook, and unzip the seat-back cover. Pull the side airbag harness and the OPDS harness (passenger's seat) out through the holes in the
seat cushion cover.
5. Remove the clip, and release the hooks (A).
6. From under the seat cushion, release the hooks (A). If equipped with a seat heater, detach the seat cushion heater connector clip (B), and remove
the harness band (C).
