RSX L4-2.0L (2005)
5. Connect the battery positive terminal to VTC oil control solenoid valve 2P connector terminal No.2.
6. Connect the battery negative terminal to VTC oil control solenoid valve 2P connector terminal No.1. Appearance of inner valve (A) in the port
should be at least 1.2 mm (1/16 in.). If the inner valve does not open, replace it; then go to step 7.
7. Replace the VTC valve O-ring (A).
8. Coat a new O-ring (A) with engine oil, then install it.
9. Clean and dry the mating surface of the valve.
10. Install the valve.
NOTE: Do not install the valve while wearing cloth fibrous gloves. Be careful not to contaminate the cylinder head opening.
