RSX L4-2.0L (2005)
23. Install the baffle plate.
24. Install the oil pump.
25. Install the oil pan.
26. Install the cylinder head.
27. A/T model: Install the drive plate, then install the transmission.
28. M/T model: Install the flywheel, then install the clutch disc and pressure plate. Install the transmission.
29. Install the engine assembly.
NOTE: Whenever any crankshaft or connecting rod bearing is replaced, it is necessary after reassembly to run the engine at idling speed until it
reaches normal operating temperature, then continue to run it for about 15 minutes.