acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

All Technical Service Bulletins for Engine Mount:|10-004|Page 1946 > < All Technical Service Bulletins for Engine Mount:|10-004|Page 1944
Page 5
background image

11. Remove the jack, then raise the vehicle on the lift.

12. Check for a gap of 4 mm (+/- 2 mm) between the metal tab of the engine mount bracket and the engine mount rubber bumper. Repeat step 10 if the

clearance is not within the parameters.

13. Tighten the rear mounting bolt.

All Technical Service Bulletins for Engine Mount:|10-004|Page 1946 > < All Technical Service Bulletins for Engine Mount:|10-004|Page 1944