RSX L4-2.0L (2005)
6. Remove the water bypass hoses, then plug the water bypass hoses.
7. Remove the fuel feed hose.
8. Remove the PCV hose (A), harness holder mounting bolt (B), and harness clamp mounting bolt (C).
9. Remove the engine wire harness connectors and wire harness clamps from the intake manifold.
^
Four injector connectors
^
IAC valve connector
^
TP sensor connector
^
MAP sensor connector
^
EVAP canister purge valve connector
10. Remove the two bolts securing the intake manifold and brackets.
