RSX L4-2.0L (2005)
11. Remove all the intake manifold mounting bolts/ nuts (A).
12. Remove the two stud bolts (B), then remove the intake manifold (C).
Installation - K20A2, K20Z1 Engines
1. Install the intake manifold (A) with a new gasket (B), then tighten the two stud bolts (C).
2. Tighten all intake manifold mounting bolts/nuts (D) in a crisscross pattern in two or three steps, beginning with the inner bolt.
3. Tighten the two bolts securing the intake manifold.
