acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

Malfunction Indicator Lamp|Description and Operation|Page 2921 > < Malfunction Indicator Lamp|Description and Operation|Page 2919
Page 6
background image

40. Remove the glove box, then remove PGM-FI main relay 2 (FUEL PUMP) (A).

41. Check for continuity between ECM/PCM connector terminal E9 and body ground.

Is there continuity?

YES - Repair short in the wire between the No.17 FUEL PUMP (15 A) fuse and the ECM/PCM (E9), or the PGM-FI main relay 2 (FUEL
PUMP). Also replace the No.17 FUEL PUMP (15 A) fuse.

NO - Go to step 42.

42. Remove the rear seat cushion.
43. Remove the access panel from the floor.
44. Disconnect the fuel pump 5P connector.

45. Check for continuity between fuel pump 5P connector terminal No.5 and body ground.

Is there continuity?

YES - Repair short in the wire between the fuel pump and PGM-FI main relay 2 (FUEL PUMP). Also replace the No.17 FUEL PUMP (15 A)
fuse.

NO - Go to step 46.

Malfunction Indicator Lamp|Description and Operation|Page 2921 > < Malfunction Indicator Lamp|Description and Operation|Page 2919