RSX L4-2.0L (2005)
46. Reinstall PGM-FI main relay 2 (FUEL PUMP) (A).
47. Check for continuity between fuel pump 5P connector terminal No.5 and body ground.
Is there continuity?
YES - Replace PGM-FI main relay 2 (FUEL PUMP). Also replace the No.17 FUEL PUMP (15 A) fuse.
NO - Check the fuel pump, and replace it if necessary. Also replace the No.17 FUEL PUMP (15 A) fuse.
48. Jump the SCS line with the HDS.
49. Disconnect ECM/PCM connector E (31P).
50. Turn the ignition switch ON (II).
51. Measure voltage between ECM/PCM connector terminals E9 and body ground.
Is there battery voltage?
YES - Go to step 52.
NO - Repair open in the wire between the No.17 FUEL PUMP (15 A) fuse and the ECM/PCM (E9).
52. Turn the ignition switch OFF.
