RSX L4-20L (2005) Alternator Overhaul for K20A3 Engine
18. Check for continuity between the slip rings (A).
-
If there is continuity, go to step 19.
-
If there is no continuity, replace the alternator.
19. Check for continuity between each slip ring and the rotor (B) and the rotor shaft (C).
-
If there is no continuity, go to step 20.
-
If there is continuity, replace the alternator.
Stator Test
20. Check for continuity between each pair of leads (A).
-
If there is continuity, go to step 21.
-
If there is no continuity, replace the alternator.
21. Check for continuity between each lead and the coil core (B).
-
If there is no continuity, go to step 22.
-
If there is continuity, replace the alternator.
22. Assemble the alternator in the reverse order of disassembly, and note these items:
-
Be careful not to get any grease or oil on the slip rings.
-
If you removed the pulley, tighten its locknut to 111 N.m (11.3 kgf.m, 81.7 lbf.ft) when you install it.