RSX L4-2.0L (2005)
9. Place the armature (A) on an armature tester (B). Hold a hacksaw blade (C) on the armature core. If the blade is attracted to the core or vibrates
while the core is turned, the armature is shorted. Replace the armature.
10. Check with an ohmmeter for continuity between the commutator (A) and armature coil core (B), and between the commutator and armature shaft
(C). If there is continuity, replace the armature.
Starter Brush Inspection
11. Measure the brush length. If it is not within the service limit, replace the brush holder assembly.
Starter Field Winding Test (K20A2, K20Z1 Engines)
