RSX L4-2.0L (2005)
-
Replace the front damper extension, damper housing, and damper housing extension as an assembly.
-
Check the transmission mount bracket position, and check for damage. If necessary, replace it.
Installation
1. Set the new damper housing assembly, front wheel house, and front bulkhead into position, and measure the front compartment diagonally. Check
the body dimensions.
2. Tack weld the clamped position.
3. Temporarily install the front sub-frame, and check the front side frame position.
4. Temporarily install the hood, front fender, headlight, and front bumper, and check for difference in level and clearance. Make sure the body lines
flow smoothly.
