RSX L4-2.0L (2005)
8. If the old quarter glass will be reinstalled (and either clip is broken off the molding), apply a light coat of primer, then apply butyl tape (A) to the
molding (B) as shown. Attach the fastener (C) with adhesive tape to the inside face of the quarter glass (D):
-
Be sure the fastener lines up with the alignment marks (E).
-
Be careful not to touch the quarter glass where adhesive will be applied.
-
Do not peel the separator off the butyl tape.
9. If a new quarter glass will be installed, attach the fastener (A) with adhesive tape to the body. Be sure the fastener lines up with the alignment
marks (B).