RSX L4-2.0L (VTEC) (2002)
/Page-3924005.png)
10. Check with an ohmmeter that no continuity exists between the commutator (A) and armature coil core (B), and between the commutator and
armature shaft (C). If continuity exists, replace the armature.
Starter Brush Inspection
11. Measure the brush length. If it is not within the service limit, replace the brush holder assembly.
Starter Field Winding Test (K20A2 engine)
12. Check for continuity between the brushes (A). If there is no continuity, replace the armature housing (B).
13. Check for continuity between each brush (A) and the armature housing (B). If there is continuity, replace the armature housing.
Starter Brush Holder Test
