RSX L4-2.0L (VTEC) (2002)
14. Check that there is no continuity between the (+) brush holder (A) and (-) brush holder (B). If there is continuity, replace the brush holder
assembly.
Brush Spring Inspection (K20A2 engine)
15. Insert the brush (A) into the brush holder, and bring the brush into contact with the commutator, then attach a spring scale (B) to the spring (C).
Measure the spring tension at the moment the spring lifts off the brush. If the spring tension is not within specification, replace the spring.
Planetary Gear Inspection