SLX V6-3.2L SOHC (1996)
Rear Door Panel: Service and Repair
REAR DOOR TRIM PANEL
REMOVAL
Preparation: Disconnect the battery ground cable
1a. Regulator handle
^
Pull the hook out and remove the regulator handle.
1b. Power window switch
^
Pry the power window switch out and disconnect switch connector.
2. Inside handle fixing screw
Remove the screw that fixes the inside handle, slide the inside handle to the position illustrated, and leave it there for the moment.
Caution:
Be careful not to impose excessive force on the inside handle link, lest this link be elongated, which could make it impossible to operate the door
with the inside handle.