SLX V6-3.2L SOHC (1996)
3. Door trim panel
^
Remove the 2 fixing screws to take off the 7 clips from the door panel.
^
Unplug the courtesy lamp connector to lift the trim panel and unlock the engagement of the waist seal section. Then, pass the inside lever
through the mounting hole of the trim panel, and detach the trim panel.
4. Inside handle
5. Door wood panel
INSTALLATION
To install, follow the removal steps in the reverse order, noting the following point.
1. When installing the inside handle, assemble it only provisionally to the inside handle link.