SLX V6-3.2L SOHC (1996)
Engine Mount: Service and Repair
Rear
1. On models equipped with airbag system, refer to Technician Safety Information for system disarming and arming procedures.
2. Disconnect battery ground cable, then raise and support vehicle.
3. Remove crossmember mounting nuts.
4. Raise transmission slightly for clearance between crossmember and transmission, then remove transmission support bolts and nuts.
5. Remove rear mount.
6. Reverse procedure to install. Tighten to specifications.
7. On models equipped with airbag system, refer to Technician Safety Information for system disarming and arming procedures.
