SLX V6-3.2L SOHC (1996)
Engine Mount: Service and Repair
Right Side
1. On models equipped with airbag system, refer to Technician Safety Information for system disarming and arming procedures.
2. Disconnect battery ground cable, then raise and support vehicle.
3. Slightly raise engine and support with suitable jack, to remove weight from engine mounts.
4. Remove engine mount nut from bracket.
5. Remove wiring harness bracket attaching bolt, then the engine mount bolts and nuts.
6. Remove engine mount.
7. Reverse procedure to install. Tighten to specifications.
8. On models equipped with airbag system, refer to Technician Safety Information for system disarming and arming procedures.
