SLX V6-3.2L SOHC (1996)
6. Disconnect the following electrical connectors:
^
The ignition control module.
^
The linear EGR valve.
^
The manifold absolute pressure (MAP) sensor.
^
The EVAP canister purge valve.
^
The throttle position (TP) sensor.
^
The idle air controller (IAC) valve.
^
The intake air temperature (IAT) sensor.
7. Remove the exhaust gas recirculation (EGR) supply tube bracket.
8. Remove the exhaust gas recirculation (EGR) supply tube from the EGR valve.
9. Remove the bolts securing the throttle body to the manifold. Refer to Throttle Body
^
Set the throttle body aside.
^
It may help to wire the throttle body to a stationary object to protect it from damage or to keep the sealing surface from being scratched.
10. Remove the bolt from the bracket on the bottom of the MAP sensor.
11. Remove the tube from the bracket on the bottom of the MAP sensor.
