TL L5-2451cc 2.5L SOHC G25A4 FI (1995)
Compact Disc Player (CD): Technical Service Bulletins
CD Player Error Codes
October 24, 1995
BULLETIN NO.
95-025
VIN APPLICATION
ALL
MODEL
2.5TL and 3.2TL
YEAR
1995 - 96
CD Player Error Codes
When a disc problem or a system problem is detected within the CD player, one of three error codes may be displayed. This service bulletin gives
descriptions, possible causes, and the action to take for each of these error codes.
ERROR CODE CDP-E0
The error code is displayed for fifteen seconds, then the disc ejects. Once the disc ejects, the radio returns to the mode it was in before the disc was
inserted. Data on the disc is not being read by the CD player.
Error code CDP-E0 can be caused by any of these conditions:
^
The disc is dirty or scratched.
^
The disc was inserted upside down into the CD player.
^
The CD player has an internal problem.
To correct this error code, follow these guidelines:
^
Clean the disc with a clean soft cloth, wiping across from the center to the outside edge.
^
If the disc is scratched, substitute a known-good disc.
^
Make sure the disc is inserted correctly, with its label facing up.
^
If the error code CDP-E0 still appears, replace the radio/CD player.
