TL L5-2451cc 2.5L SOHC G25A4 FI (1995)
Refer to Service Bulletin 87-015 for audio unit exchange or repair procedures.
ERROR CODE CDP-E1
While playing, the disc stops and the error code is displayed. The error code may also be set when attempting to load a disc. The radio and the cassette
player operate normally.
Error code CDP-E1 can be caused by any of these conditions:
^
The disc is warped or deformed.
^
A new disc has small plastic burrs along its inner or outer edge.
^
The Load or Eject function of the CD player is malfunctioning.
^
The CD player has an internal problem.
To correct this error code, follow these guidelines:
^
Push the CD player's Eject button. If the disc ejects and the error code goes away, substitute a known-good disc and test its operation.
^
Remove small plastic burrs from a new disc by rubbing its inner and outer edges with a pencil or pen. Then, retry the disc.
^
If the disc ejects but the error code is still there, a mechanical problem exists. Replace the radio/CD player.
^
If the disc does not eject, do not try to force it out. Replace the radio/CD player. Fill out and attach a Tape or CD Return Label (reorder # E2094) on
the defective unit. The vendor will remove the disc and return it to the customer.
Refer to Service Bulletin 87-015 for audio unit exchange or repair procedures.