TL L5-2451cc 2.5L SOHC G25A4 FI (1995)
ERROR CODE CDP-E2
The error code is displayed for fifteen seconds, then the disc ejects. Once the disc ejects, the radio returns to the mode it was in before the disc was
inserted.
Error code CDP-E2 can be caused by either of these conditions:
^
The CD player stored a false error code.
^
The CD player has an internal problem.
To correct this error code, follow these guidelines:
^
Eject the disc, then reinsert it. It the disc plays normally, the radio/CD player is OK.
^
If the error code CDP-E2 reappears after the disc is reinserted, replace the radio/CD player.
NOTE:
Do not replace the radio/CD player unless the error code reappears.
Refer to Service Bulletin 87-015 for audio unit exchange or repair procedures.
WARRANTY CLAIM INFORMATION
Refer to the Flat Rate Manual for the repair being performed.
