TL L5-2451cc 2.5L SOHC G25A4 FI (1995)
Evaporator Case: Service and Repair
Heater-Evaporator Unit Replacement
1. Recover the refrigerant with a Recovery/Recycling/Charging System.
2. Remove the dashboard lower cover, the knee bolster and the glove box.
3. Remove the ECM.
4. Remove the ABS control unit and the radiator fan control module together with the bracket, then remove the TCM. Remove the security control
unit.
5. Disconnect the connectors from the power transistor, blower motor high relay, evaporator temperature sensor, blower motor and the heater
sub-harness, then remove the blower motor and heater subharness connectors from the brackets. Disconnect the passenger's airbag harness clip.
6. Remove the wire harness clips, the three self-tap- ping screws and the pipe cover.
7. Remove the expansion valve covers, then disconnect the suction line and unbolt the expansion valve from the evaporator.
NOTE: Plug or cap the lines immediately after disconnecting them to avoid moisture and dust contamination.
