acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

Ignition Switch > < Starting System - Can't Turn Key In Ignition Switch
Page 1
background image

Ignition Lock: Service and Repair

On models equipped with airbag system, refer to Technician Safety Information for system disarming and arming procedures.

1. On models equipped with radio coded theft protection system, refer to Vehicle Damage Warnings for system disarming and arming

procedures.

2. Disconnect battery ground cable.
3. Remove instrument panel lower cover and knee bolster assembly.
4. Remove upper and lower steering column covers.
5. Disconnect ignition switch electrical connectors.
6. Remove steering column holder mounting bolts and nuts, then the lower column.
7. Remove each of the heads from the two shear bolts using a 5mm (3/16 inch) drill bit.
8. Remove steering lock assembly.
9. Reverse procedure to install.

10. On models equipped with radio coded theft protection system, refer to Vehicle Damage Warnings for system disarming and arming

procedures.

11. On models equipped with airbag system, refer to Technician Safety Information for system disarming and arming procedures.

Ignition Switch > < Starting System - Can't Turn Key In Ignition Switch