TL L5-2451cc 2.5L SOHC MFI (1997)
16. Install the pad spring on the caliper.
17. Apply the recommended rubber grease in the caliper seal set to the sliding surface of the pins and inside of the new pin boots.
18. Install the pin boots into the grooves in the caliper bracket properly.
19. Insert pin A and pin B into the caliper bracket.
20. Install the pin boots into the grooves in the pins properly.
21. Install the brake pad retainers and brake pads.
22. Align the cutout in the piston with the tab on the inner pad.
23. Install the caliper on the caliper bracket, and tighten the caliper mounting bolts.
24. Connect the brake hose to the caliper with new sealing washers, and tighten the banjo bolt.
